Method for distinguishing hydraulic hose connector unt

There are many types of hydraulic hose joints. In actual use, the correct sample selection or tf-like design should consider the following points. G① The use conditions of the hose. a L for the pressure range and working state, b working medium and temperature. c operating environment.的 The price and reach form of rubber hose for women's clothing are from sealed form. The size of the limb tube and the minimum bend 1 'mix * ④ the structure and material of the hose. ⑤ Ease of equipment maintenance and replacement.的 Requirement on the reliability of the safety of the soft times grave joints. ⑦The feasibility and economics of manufacturing Ding Yi, according to the requirements of the above-mentioned theory, determine the structural form, connection form, and seal form of the pipe joint on AJ, as well as the manufacturing method of the joint and the driving method of the assembly, etc. Basically seeking.

Flexible hose joints and reducing rubber joints

There are three types of loose flange rubber joints, fixed flange rubber joints and threaded rubber joints according to the connection method;

Flared pipe joints can be divided into single ball rubber joints, double spheres, reducers, curved spheres and wind pressure coils according to the layout. It consists of inner and outer layers of rubber, ply and traveller, which form a tubular rubber piece. After vulcanization, it is combined with a metal flange or a parallel joint loose sleeve.

TC / Q1012 steel wire wound 4S ultra-high pressure C-type hose assembly

Stainless steel pipe joints can greatly reduce the sensation and noise of the pipeline system, and can basically handle the joint displacement of various pipelines. Rubber joints can handle questions such as axial elasticity and different heart degrees. According to different data, hydraulic hose joints and reducer rubber joints can be made into various types such as acid resistance, alkali resistance, corrosion resistance, oil resistance, heat resistance, etc., and are accustomed to a variety of media and environments. Reducing rubber joint materials are polar rubber, good sealing, light weight, convenient device maintenance and long service life, but avoid touching with sharp metal instruments and puncture the sphere. For overhead use, the hydraulic hose joint can be equipped with an elastic bracket. When installing the device, the bolts must be tightened diagonally. If the pipeline pressure is too high, use extreme bolts to connect the two flanges together.

Hydraulic hose joint principle

Hydraulic hose joints, one with check valve and one without check valve. For applications with check valves, the check valve end is connected to the air source. When the check valve is turned off, the check valve is automatically closed. When it is turned on, the movable end ejector opens the check valve. Self-locking is a one-way valve that uses steel balls embedded in the groove. At the same time, the ball with a one-way valve is used to lock the steel ball with a "cone --- cylindrical" sleeve.