legines.com
Push In Unended Single Nozzle

Push In Unended Single Nozzle

Slip Lock Connector with Nozzle The nozzle easily rotates a full 360 degrees to direct the mist where desired. This connector is requires little assembly and disassembly when needed.

Typical Application:
Fog systems.

Pressure:
Working pressure from vacuum to 1000 psi

Vibration:
Fair resistance.

Contact Us

SPECIFICATIONS

PART#

TUBE SIZE

OPERATING PRESSURE

THREAD

ADAPTER TUBE

PZD 09

3/8"

1000PSI

10/24unc-2B

PE/NYLON/SS

PZD-04

1/4"

1000PSI

10/24unc-2B

PE/NYLON/SS

The PZD-09 is a standard push in unended single nozzle. This connector provides an overall length of 1.38” when connected to tubing and can be used with air or water. To disconnect, simply squeeze the sides together, which locks the pull pin tube in place, until it is fully out of its coupling. The nozzle easily rotates a full 360 degrees to direct the mist where desired. This connector is requires little assembly and disassembly when needed.
This connector is ideal for fog systems. The nozzle easily rotates a full 360 degrees to direct the mist where desired. This connector is requires little assembly and disassembly when needed.
The PZD-09 push in unended single nozzle is designed to be used with a slo lock connector. It easily rotates 360 degrees to direct the mist where desired.

CONTACT WITH US