What are the common problems in the application of stainless steel hydraulic joints, stainless steel sleeve joints and stainless steel quick couplings?

Release time:
Abstract:Common problems in the application of stainless st...
Common problems in the application of stainless steel quick plugs are as follows: Do not use fluids other than liquids. For the application of working time, the upper limit of working pressure is relatively small. Do not suffer from myopia beyond the applicable range, causing material damage and disclosure. Cannot be distorted by human factors may be stretched to prevent damage. Do not re-enter the direction of metal powder to prevent construction dust and prevent poor construction and leakage. When the external thread is installed, the installation process should not exceed a large stable torque to prevent damage. Do not use plastic hoses with gaps to prevent them from falling off. Use of mechanical equipment under vibration and shock conditions may reduce durability and effectiveness. The fluid used must be carefully cleaned by the machine. It cannot be removed.

Daily work is done by the connector body, which is connected to the connector at one end and to the machine at the other. The connector is a metal connection specification and is mechanically connected to the road bridge. The elbow changes the direction of the tube and its role is different. Metal connectors within the hydraulic drive are used to connect components between the hydraulic adapter and the hydraulic oil pipe.

They are divided into: hydraulic hoses, high pressure ball valves, clamp joints, welded joints, high pressure hoses, clamp joints, tees, non-standard tubes, joints, flared joints, rotary joints, swivel joints, quick connectors, and copper pipe joints. Elbow is used to change the direction of the pipe. Depending on the angle of view, the metal joint type tells you that there are three common types of bends at 45 ° and 90 ° 180 °, in addition to 60 ° and other unusual angular bends that must be included. Elbows are made of pig iron, stainless steel sheet, alloy steel, malleable cast iron, carbon steel, rare metals and plastics.

Water pipe connection methods are: flange connection, socket connection, fuse connection, bolt connection and socket connection. According to the production process can be divided into: welding elbow, stamping elbow, thrust elbow, forging elbow, butt welding elbow. Other names: 90 degree bend, top angle, love and bend, etc.