Common problems of stainless steel joints in applications

Common problems and characteristics of stainless steel joints in the application, after a period of continuous use, it is easy to fall off, leakage and other common faults. There will be many problems with imported stainless steel joints of the same series of products. Before using stainless steel quick connectors, check for leaks. If so, stop immediately and switch to a new product. Make sure the air gun valve is closed before connecting. Stainless steel quick couplings should not be used for primary purposes other than connections, such as penetrating metal powder or dust, as this may result in inoperability or leakage.


The hose should be securely inserted into the bottom of the socket and secured with hose straps or nuts. Prevents cracks when applying hoses, avoids, leaks and drops. If there is vibration or shock in the app, it should stop working immediately, if forcing the digest will degrade the performance of the device. Attention should also be paid to the application of stainless steel joints, the maximum working pressure limit cannot be exceeded, and the liquid used must pass through the clean liquid of the filter device without other residues.





When working, the temperature should be controlled, and when applying stainless steel quick couplings, it should be avoided, causing the rubber seals to wear or leak. Do not knock, bend, or stretch the joints by human factors to avoid causing joint damage.


1. Cost saving: When disassembling and connecting the oil circuit according to the quick connector, the posture is easy, saving time and effort, and sufficient human resources.

2. Fuel saving: When the oil circuit is disconnected, a single engineering valve on the quick connector can close the oil circuit, and the oil is not easy to discharge, preventing the damage of the hydraulic oil vapor pressure.

3. Environmental protection: When the quick joint is broken and joined, the oil is not easy to leak, and the ecological environment is protected.

4. Mechanical equipment with unique design and easy transportation: Large and medium-sized equipment or hydraulic tools that must be easy to carry should be transported by quick splicing and then assembled at the station.

5. Economic development: All the above advantages create economic value for customers.