Nut is the most important part of Connector

Release time:2020-09-03
Abstract:

The function of the nut is to fix the front and rear ax […]

The function of the nut is to fix the front and rear axles by tightening the screws through the front and rear axles, so that the frame and the tires are fixed together. In order to prevent the nut from loosening, the split pin must be fixed through the slot of the slotted nut, and the split pin must be fixed. The slotted nut must pass through the middle of the axle screw.

Usually, both ends of the axle screw need to be drilled. The diameter of the hole and the slot width and depth of the slotted nut determine what specification of split pin to choose. When the axle screw is selected When it matches the cotter pin and the slotted nut, the nut fixes the front wheel and the frame through the axle screw, and the slotted pin passes through the hole fastener of the axle screw to hold the slotted nut, so that the slotted nut does not loosen , So that the vehicle will not loosen when moving.

For the connection where the head of the slotted nut is slightly higher or flat than the plane of the fixed part, a hexagonal nut with a slightly smaller outer diameter than the head of the slotted nut can be used and placed on the head of the hexagonal slotted nut, and then the nut and the hexagon Slotted nut heads are spot welded together. After cooling, use a movable hand to twist the nut to take out the hexagon socket bolt.

The function of the slotted nut is to fix the front and rear axles of the vehicle by tightening the screws passing through the front and rear axles, so that the frame and the tires are fixed together. In order to prevent the nut from loosening, a split pin must be fixed through the slot of the slotted nut. To fix the slotted nut, the pin must pass through the middle of the axle screw.